Ku nst sto ffschweißtec hni k
Safety rules
Chapter 2
30.07.12
Working Instructions WIDOS 10000 mobile
Page 13 of 52
2.9.3. Dangers caused by the hydraulics
System parts and pressure hoses should be depressurized before the beginning of
any repair work. Even if the machine is switched off, pressure may be in the
hydraulic accumulator! There is a danger of injuring the eyes by hydraulic oil
squirting out.
•
Damaged hydraulic hoses have to be
immediately
replaced.
•
Make a visual inspection of the hydraulic hoses before each work beginning.
•
The hydraulic oil is
inedible!
2.9.4. Danger of catching clothes by the planer
You can cut yourself or even get bones broken!
For some machines the planer may shortly turn when switching the machine on!
•
Only wear clothes tight to the body.
•
Do not wear rings or jeweler during the work.
•
If necessary, wear a hair-net.
•
Do not touch the surfaces.
2.9.5. Risk of injury by noise
Noise exceeding 80 dB (A) may occur; during planing it is obligatory to wear ear
protection!
2.9.6. Danger of combustion by heating element and welding area
You can burn yourself, inflammable materials may ignite.
The heating element temperature is heated up to more than
220°C / 428°F
!
•
Do not touch the surfaces of the heating element.
•
Do not leave the heating element unsupervised.
•
Take enough safety distance to inflammable materials.
•
Do wear safety gloves.
•
Drive the heating element into the machine only prior to welding.
•
Make sure that nobody can touch the heating element while swinging it in or out.
•
Make sure that you do not remove resp. fold the heat protective film.
2.9.7. Dangers by unsecured carriage
Persons may get injured or objects may get damaged by an unsecured carriage.
•
Never park the machine in unsecured condition; block the wheels by chocks.
•
Secure the machine e.g. by a vehicle before you remove the chocks.
