widos 10000 mobile, Working Instruction

Page: 28 / 55

Ku nst sto ffschweißtec hni k
Foundation: 2207, 2208 DIN 16932 German association for welding
Use for:
10000 mobile DA 500 - 1000
12000 mobile DA 800 - 1200
1 bar on manometer: 372 N
PE 80 The value for heating element temperature is between 200° C - 220° C.
The
smaller the pipe wall the higher the temperature.
PE 100 The standard value for heating element temperature is 220° C.
Increase the change-over time and the welding pressure time at PE 100 as fast as possible !
time to
change- reach full
over welding cool-down time
0,15 (PE) time pressure
pressure in
T
desired
temperature
time
pipe pipe SDR bead-up circular heat-up max. time welding cool-
diameter wall pressure bead time change- to reach pressure down
OD (s) [bar] min. [s] over welding [bar] time
[mm] [mm] [mm] time pressure [min]
[s] [s]
in welding area
Table for PE
bead-up heat-up
Additional to the given bead-up force and to the welding force the moving force of the support must be added !
welding area
P (N/mm²)
630 15,4 41 12 2,0 154 9 9 12 20
630
19,3 33 15 2,5 193 10 11 15 24
630
24,1 26 19 2,5 241 11 13 19 30
630
30,0 21 23 3,0 300 16 16 23 37
630
35,7 17,6 27 3,0 357 16 18 27 43
630
37,4 17 29 3,5 374 16 19 29 45
630
46,3 13,6 35 3,5 463 19 19 35 56
630 57,2 11 42 4,0 572 22 29 42 67
560 62,5 9 40 4,0 625 23 31 40 72
710 17,4 41 16 2,0 174 10 10 16 22
710 21,8 33 20 2,5 218 11 12 20 27
710 27,2 26 24 3,0 272 12 15 24 33
710 33,9 21 30 3,0 339 15 18 30 41
710 40,2 17,6 35 3,5 402 17 20 35 49
710 42,1 17 36 3,5 421 18 21 36 51
710 52,2 13,6 44 4,0 522 21 26 44 62
710 64,5 11 53 4,0 645 24 32 53 74
800 19,6 41 20 2,0 145 9 9 20 19
800 24,5 33 25 2,5 245 12 13 25 30
800 30,6 26 30 3,0 306 14 16 30 37
800 38,1 21 37 3,5 381 16 20 37 46
800 45,3 17,6 44 3,5 453 19 23 44 55
800 47,4 17 46 3,5 474 19 24 46 57
30.07.2012 Working instructions WIDOS 12000 mobile Page 27 / 2 of 52