33
/
65
www.wireless-tek.com
Press "untagged =>" to configure the port as an untagged member of the specified VLAN,
and select one or more VLAN from all the current VLAN.
The key "Non-member <=" removes the port from the specified one or more VLAN, is
no longer a member of these VLAN, and selects one or more VLAN from the VLAN to
which the port belongs.
Pic 33 VLAN port configuration page
8
、
SNMP configuration
（
1
）
SNMP community configuration page
Figure 34 shows the SNMP Community Configuration page, which allows the user to
configure the name of the switch and the read and write permissions, and a total of eight
entries can be configured.
By default, the switch has a public name of the common body, the common body is
read-only permissions. Corresponding to this, there is only one active entry on the page, the
common name is public, and the permissions are read-only. When the switch needs to be
networked through SNMP, you need to configure a readable and writable community.
