47
/
65
www.wireless-tek.com
Pic 47 configuration page.
（
2
）
Radius configuration page
Figure 48 shows the Radius configuration page, the user can configure information
related to Radius, can set the information include:
Radius server IP address, in the authentication and billing must be set when
this field.
Optional Radius server IP address, which can be set if there is an alternate
Radius server.
Authentication UDP port, the default value is 1812, the user generally do not
need to modify this field.
Whether to start billing, the default is to start, when doing the authentication and
billing to start billing.
Billing UDP port, the default value is 1813.
Shared key, used to set the switch and the Radius server encryption between
the shared password, in the authentication and billing must be set this field, and to
the same settings on the Radius server.
Vendor-specific information, users generally do not need to modify this field.
NAS port, NAS port type, NAS service type, these three values users generally
do not need to modify.
Whether to start or turn off the roaming function of Radius.
