6
/
65
www.wireless-tek.com
Hardware
and
Software
System Requirement
CPU
Pentium 586 above
RAM
128MB above
Resolution
800x600 above
Color
256 colors above
Browser
IE4.0 above or Netscape4.01 above
Operating
System
Microsoft
®
,Windows95
®
,Windows98
®
,WindowsNT
®
,
Windows2000
®
,WindowsXP
®
,WindowsME
®
, WindowsVista
®
,
Windows7
®
, Windows8
®
,MAC, Linux,Unix operating system
Note:
Microsoft®,Windows95®,Windows98®,WindowsNT®,Windows2000®,WindowsXP
®,Windows ME®, WindowsVista®, Windows7®, Windows8®
are registered trademarks of
Microsoft Corporation, all other product names, trademarks, registered trademarks and service
marks, Copyright is held by their respective owners.
3
、
WEB browsing session login
Before you start a Web browsing session, you need to confirm:
IP has been configured on the switch. By default, the interface IP address of the
switch
’s VLAN1 is 192.168.0.1.
The subnet mask is 255.255.255.0.
A host computer with a Web browser installed has been connected to the network,
and the host computer can PING through the switch.
After the completion of the above two tasks, the user in the browser's address bar
enter the address of the switch and press Enter to enter the switch Web login page,as
shown in Figure 1,When multi-user management is not enabled, the user login to the
Web when the need for anonymous user (admin) password verification,Only enter the
correct password to access the Web, anonymous user password default to admin.
If the system is enabled for multi-user management and configured privileged users, the
anonymous user password will not take effect, the user access to the Web does not do
anonymous user password verification, but do multi-user management user name and
password authentication.
