26
/
65
www.wireless-tek.com
Delete Trunk Group key.
During the page configuration process, the aggregation method is configured to
correspond to the selected trunk group ID. The existing Trunk group can configure the
aggregation method. You can add or remove member ports on the existing Trunk. In the case
of no member ports, To delete a Trunk group.
The switch provides six types of port aggregation: based on the source MAC address,
based on the destination MAC address, based on the source and destination MAC addresses,
based on the source IP address, based on the destination IP address, based on the source
and destination IP addresses.
The switch supports up to eight groups of port aggregation. Each group of port
aggregation supports up to eight ports. Each trunk group can configure its own port
aggregation method.
Pic 25 Port trunking configuration page
（
9
）
Port mirror configuration page
Figure 26 shows the Port mirror configuration page
，
This page allows the user to
configure port mirroring.Port mirroring is through the mirror port to monitor the
output of the mirror output port and the mirror input port input data packets.Mirror
port can only select one, and the mirror output port and the mirror input port can
choose multiple.The page consists of four parts: listening port, configurable port,
listening direction and mirroring configuration information.Configure a mirroring
port to configure a mirroring port from the listening port. Only one port can be
selected from the listening port. Select the mirrored port from the configurable port,
select the listening direction from the listening direction, and press the Apply key.
The result will be The mirror configuration information is displayed.
