InC
052413
Page 6 | 1-800-343-9463
Receiving and Inspecting the Unit
•
Lift only at the designated hand hold locations on the shipping container or fully support the unit from
underneath. A shipment may include one or more boxes containing accessories.
•
Before opening the container, inspect the packaging for any obvious signs of damage or mishandling.
•
Write any discrepancy or visual damage on the Bill of Lading before signing.
•
Place the box containing the WhisperKOOL unit on a tabletop to prepare it for testing prior to installing.
•
Sit upright for 24 hours.
Note:
WhisperKOOL InCellar units are manufactured in the USA and tested prior to shipment.
Review the Packing Slip to Verify Contents
•
Check the model number to ensure it is correct.
If any items listed on the packing slip do not match your order information,
contact WhisperKOOL Customer Service immediately.
Check the Box for the following contents:
•
InCellar Cooling Unit
•
InCellar Intake Plenum
Accessory Kit One:
•
WhisperKOOL InCellar Series Owner’s Manual
•
8’ Power Cord
•
Bottle Temperature Probe (Standard Unit)
•
10’ Drain Line
•
Anti-Siphon device
•
Tubing adapter
RECEIVING & INSPECTING THE UNIT
Please leave the WhisperKOOL unit in its original box until you are ready for installation. This will allow you to move
the product safely without damaging it. When you are ready to remove the product from the box, refer to the
installation instructions.
TIP:
Save your box and all packaging materials. They provide the only safe means of transporting/shipping the unit.
•
InCellar Register
•
Filter
