manualshive.com logo in svg

Whisper Power 61242040, User Manual

Share
Download
Whisper Power 61242040 User Manual Download Page 4

4       WhisperPower Inverter / Battery Charger

   

For safe and optimum performance, the Inverter-Charger must be used properly. Carefully 
read and follow all instructions and guidelines in this manual and give special attention to the 

CAUTION

 and 

WARNING

 statements.

PLEASE KEEP THIS MANUAL FOR FUTURE REFERENCE

Disclaimer

While every precaution has been taken to ensure the accuracy of the contents of this 
guide, 

Whisper Power 

assumes no responsibility for errors or omissions. Note as well that 

specifications and product functionality may change without notice.

Important 

Please be sure to read and save the entire manual before using your 

Whisper Power 

Sinewave Inverter-Charger. 

Misuse may result in damage to the unit and/or cause harm 

or serious injury. Read manual in its entirety before using the unit and save manual for 
future reference.

Model Numbers

230VAC Series :

61242040 - EU  Inverter-Charger 24V / 2000W / 40A - 230VAC (Schuko Socket - CEE 7/4)

61243050 - EU  Inverter-Charger 24V / 3000W / 50A - 230VAC (Schuko Socket - CEE 7/4)

Service Contact Information

Email: [email protected]
Web: www.whisperpower.com

Summary of Contents for 61242040





































Reviews:

No comments

Brands by name

Popular brands

Load more brands