manualshive.com logo in svg

Whisper Power 61242040, User Manual

Share
Download
Whisper Power 61242040 User Manual Download Page 10

10       WhisperPower Inverter / Battery Charger

   

2 

1 

3

4  5 

6  7  8

Item

①  

Power indicator

②   

AC Output indicator

③  

Status indicator

④  
⑤
⑥
⑦
⑧
⑨

⑨

Display Panel socket

⑩

⑩

⑩

BTS port

 

Multi-Function Display

  

Typical Wiring Block Diagram of Inverter-Charger:

 

 A 

  Battery Bank

• 

 The use of deep cycle, lithium ion battery is highly recommended for power inverter 
application

• 

 For battery size, you need to identify how much and for how long the inverter has 
to provide AC power to the loads (based on Amps x hour energy consumption). It is 
recommended to purchase as much battery capacity as possible. 

AC Load

Estimated run time on 24V Battery bank on 24V Input Models

24V/60AH

24V/120AH

50 W

22 hrs.

44 hrs.

100 W

11.5 hrs.

23 hrs.

200 W

5 hrs.

11 hrs.

500 W

2 hrs.

4 hrs.

1000 W

49 mins

2 hrs.

1500 W

27 mins

1 hr.

2000 W

15 mins

49 mins

2500 W

N.R.

37 mins

3000 W

N.R.

27 mins

N.R. - Not Recommended. Based on more than 2C discharged on battery capacity.  

Estimated run times are for reference use only. Actual run times may vary on battery type used.

2 

1 

3

Summary of Contents for 61242040





































Reviews:

No comments

Brands by name

Popular brands

Load more brands