Whisper Power 61242040, User Manual

Page: 17 / 36

WhisperPower Inverter / Battery Charger 17
5. UNIT OPERATION
The unit is preset with factory default settings and will fulfill the basic needs for inverter-
charger operation. The display is used to provide information about the unit status and the
unit function can be customized through the Display.
Once the unit function is customized, the display can be removed if desired, as the unit can
run without it.
Understanding the Indicator/Push Button/Unit Functions
Power AC Out Status
On/Off
BTS
Remote
d
h
i
p
j
k
g
e f
2
1
3
4 5 6 7 8
Item
① d
Power indicator
② e AC Output indicator
③ f Status indicator
④ g
⑤
⑥
⑦
⑧
h Display port
i BTS port
j Digital input port
k Program port
p CAN BUS port
Indicator Status Function
Power ON Unit is power ON
AC Output
ON
AC Output Switch is turned ON and AC is available at the
Output Socket
OFF
AC Output Switch is turned OFF and AC is not available at
the Output Socket
Status
Green AC Output is running from Utility
Green (Flash)
AC Output is running from utility and battery charger is
charging the battery
Amber AC Output is running from Inverter
Amber (Flash)
Utility is detected and is under verification. AC Output is still
running from Inverter and will switch to Utility in about 10
seconds.
Red Error/Warning occurs. Display will show Error or Warning code
Normal Operation
When unit is On, the Multi-Function display shows Battery Voltage ‘V’.
Pressing any button will illuminate the backlighting of the display for about 10 seconds.
‘Power’
button (Same function as the green ‘On/Off’ push button on the main unit):
- To turn the inverter ON: press and hold until hearing the beep (in about 1 sec.).
Display turns on and shows ‘-- -- --‘, all icons turn ON, followed by the revision levels