manualshive.com logo in svg

Whisper Power 61242040, User Manual

Share
Download
Whisper Power 61242040 User Manual Download Page 24

24       WhisperPower Inverter / Battery Charger

   

Battery Charging Cycle

Charging Voltage Setting: Bulk/Absorption (AbS), Float (FLO) and Recharge (rEC)

Battery Type

Bulk Voltage 

(Default)

Float Voltage 

(Default)

Recharge Voltage 

(Default)

GEL

27.6-29.6V 

(28.4V)

26.0-28.0 

(27.6V)

25.6-28.0 

(25.6V)

Flooded

27.6-29.6 & 31.6V 

(28.8V)

26.0-28.0 

(27.0V)

25.6-28.0 

(25.6V)

AGM

27.6-29.6V

 (28.6V) 

26.0-28.0 

(26.8V)

25.6-28.0 

(25.6V)

Lithium

27.6-29.6V

 (27.8V) 

26.0-28.0 

(27.0V)

25.6-28.0 

(26.4V)

Program

27.6-29.6V

 (27.6V) 

26.0-28.0 

(26.4V)

25.6-28.0 

(25.6V)

Power Supply 

26.0-28.0V 

(27.6V)

•  Consult the battery manufacturer when choosing the bulk and float voltage for the battery bank. 
•  When selecting the Float voltage, it has to be with a minimum of 0.8V below Bulk Voltage setting. 
•  The Recharged Voltage determines the restart cycle of the battery bank. The charger will go through a 

full recharge cycle when the battery voltage drops to the Recharge Voltage set value. When selecting the 
Recharge Voltage, it has to be with a minimum of 0.8 below the Float Voltage setting.

•  If Power Supply is chosen, the charger will provide a constant voltage to charge the battery bank.

Summary of Contents for 61242040





































Reviews:

No comments

Brands by name

Popular brands

Load more brands