manualshive.com logo in svg

Whisper Power 61242040, User Manual

Share
Download
Whisper Power 61242040 User Manual Download Page 21

      

WhisperPower Inverter / Battery Charger

         

21

Battery 

Inverter

Mode

Battery bar(s) in solid indicating the unit is running in Battery Mode. The bars show estimated 
remaining battery power. 

4 solid bars: Battery is Full
3 solid bars: Battery capacity with 75% remaining
2 solid bars: Battery capacity with 50% remaining
1 solid bar: Battery capacity with 25% remaining
No bar: Battery is empty. Inverter will shut down when it reaches under-voltage shutdown 
point.

Note: This indicator is for reference use only. It varies depending on battery health or type 
used.

Charger
  Mode

Battery bar(s) with the last bar flashing indicates the unit is running in By-Pass mode and the 
battery charging process is in progress. The charging stages are indicated by the number of 
bars.

4 bars in solid: indicates the battery is fully charged and it is in Float stage

Top bars flashing: indicates the battery is in Absorption charging stage

Second top bar flashing: indicates the battery is in Bulk charging stage and the 
battery is > 27.0V

Second bottom bar flashing: indicates the battery is in Bulk charging stage and the 
battery is > 25.0V

Bottom bar flashing: indicates the battery is in Bulk charging stage and the battery is 
> 23.0V

No bar: indicates the battery is in Bulk charging stage and the battery is > 21.0V

Battery icon flashing: indicates the battery is in Bulk charging stage and the battery 
is below 21.0V

Display 

Character

Meaning

‘A’ icon On indicates the display shows battery discharge current (28A as shown)

‘kW’ icon on, it indicates the display shows AC Output power in kW (0.80kW = 800W as 
shown)

‘V’ icon on, it indicates the display shows battery voltage in V (12.8V as shown)

Warning icon on, it indicates the display shows Error/Warning Code (E01 as shown, Battery 
Low Disconnected error)

Equalization on Flooded battery is in process. This function is available for use with 
Flooded battery type only. The display will also show the equalization voltage during the 
process. Follow the instruction provided by the battery manufacturer when performing the 
equalization process.

Indicating the Main unit firmware revision (R:1.0 shown)

Indicating the Display Panel firmware revision (r:1.0 shown)

Summary of Contents for 61242040





































Reviews:

No comments

Brands by name

Popular brands

Load more brands