manualshive.com logo in svg

WHISPER KOOL Mini Split, Tech Manual, Page: 34 / 36

Share
Download
WHISPER KOOL Mini Split Tech Manual Download Page 34

Page 32 | 1-800-343-9463

MPS

 031413

TECHNICAL ASSISTANCE

The customer service representative will be able to assist you with your questions and warranty information more 

• 

The model and serial number of your WhisperKOOL systems. 

• 

Location of unit and installation details, such as ventilation, ducting, construction of your wine cellar, and 

room size. Photos of the cellar and installation location may be needed.

Contact WhisperKOOL Customer Service 

1738 E. Alpine Ave

Stockton, CA 95205

www.WhisperKOOL.com

Email: [email protected]

Phone: (209) 466-9463

US Toll Free 1(800) 343-9463

Fax   (209) 466-4606

WhisperKOOL offers accessories to enhance and customize your wine cooling unit. 

Exterior Housing

Protects the Condensing unit from the weather elements when the unit is located outside.

Condensate Pump Kit 

The  condensate  pump  kit  is  designed  as  an  automatic  condensate  removal  pump  for  water  dripping  out  of  our 

Evaporator Unit’s (Fan Coil Unit’s) drain line. The pump is controlled by a float/switch mechanism that turns the pump 

on when approximately 2-1/4” of water collects in the tank, and automatically switches off when the tank drains to 

approximately 1-1/4”. The condensate pump kit allows the excess condensate to be pumped up to 20ft away from the 

unit.

Accessories can be purchased at www.whisperkool.com

ACCESSORIES FOR COOLING UNITS

Summary of Contents for Mini Split





































Reviews:

No comments