Automated Pet Care Products, Inc.
40 W. Howard, Suite B-5, Pontiac, MI 48342
Toll Free: 877-250-7729 Fax: 248-253-1797
www.Litter-Robot.com
8
3.
“Empty” Button
The “Empty” cycle removes most litter from the
Globe, bypassing the sifting screen. This cycle is
convenient for removing the old litter prior to
cleaning the interior of the Globe.
You can read the details about removing litter in the
section “Cleaning and Maintenance”.
4.
Green Light (“OK/Waiting”)
This light indicates that the unit is OK and that the
Litter-Robot is ready for your cat.
5.
Yellow Light (“Cycling/In Use”)
The Litter-Robot is cycling (Cleaning cycle, Fill cycle,
or Empty cycle).
6.
Red Light (“Sensor/Timing”)
The red light indicates that the Cat Sensor has been
activated and the Litter-Robot is going through the
seven minute count-down before starting the
cleaning cycle. If the red light is flashing, an error
has occurred, please see the Troubleshooting
section for steps to take to solve this problem.
NOTE
If the Cat Sensor is tripped again within the seven
minutes of the count-down, the count-down timer
resets. The Globe will not turn until another seven
minutes have elapsed. You can cancel the "cat
detected" seven minute count-down (red light is on)
at any time by pressing any of the buttons on the
Control Panel.
Automated Pet Care Products, Inc.
40 W. Howard, Suite B-5, Pontiac, MI 48342
Toll Free: 877-250-7729 Fax: 248-253-1797
www.Litter-Robot.com
9
Control Panel Lockout Feature
The Control Panel Lockout Feature prevents
children (or your pet) from pressing the buttons
and cycling the unit unnecessarily. However, the
Litter-Robot will continue to function normally in the
automatic mode.
To lock the Control Panel:
•
Hold down any button on the Control Panel
for ten seconds.
To unlock the Control Panel:
•
Hold down any button on the Control Panel
for ten seconds.
