COMPONENT ACCESS
3-12
n
French-Door Bottom Mount Refrigerator
Thermistor and Possible Frost Build-Up (Continued)
6.
Check the Refrigerator section evaporator thermistor for
proper contact with the tubing.
•
Refrigerator section evaporator thermistor was positioned
in the improper location.
•
Correct location is on the straight section of suction line,
just above the connection with evaporator.
•
Check the thermistor is in proper shape.
•
Inspect the Thermistor for proper resistance and for
damage. Thermistor in figure T is split and needs to be
replaced.
7.
Check the ice maker label on the ice maker for the date code
and the “P1SM” tag.
•
If the date code on the ice maker is prior to 06/22/2017 or the
“P1SM” (tag is missing then the ice maker needs to replaced
with the part numbers listed below in the table.
•
When using the new ice maker ensure that the date code is
after 06/22/2017 and “P1SM” tag is present as shown in.
•
If the Ice Maker Part# is correct, then perform Service
Step#120 to ensure the ice maker is working correctly. There
should be at least 1 minute gap between two consecutive
checks using service step#120 otherwise you may get an error
code.
•
If any error code is observed and you did perform two
consecutive service step#120 less than one minute apart.
Then IM is faulty and you should replace ice maker as per the
parts provided below in the table:
Model
Refrigerator
Ice Maker
Freezer Ice
Maker
Date Code
WRF992FIF*
W10888881
NA
06/22/2017
WRF993FIF*
W10888881
W10898289
06/22/2017
WRF995FIF*
W10888881
W10898289
06/22/2017
KRFC604FS*
W10888881
NA
06/22/2017
KRFC704FS*
W10888882
NA
06/22/2017
KRFC704FP*
W10888882
NA
06/22/2017
KRFC704FB*
W10888882
NA
06/22/2017
JFFCC72EF*
W10888883
NA
06/22/2017
JFFCC72EF*
W10888883
NA
06/22/2017
