COMPONENT ACCESS
3-2
n
French-Door Bottom Mount Refrigerator
Machine Compartment Components
Machine Compartment Cover
1.
Unplug refrigerator or disconnect power.
2.
Access the machine compartment components by removing
screws holding machine compartment cover on back of
refrigerator.
Below picture shows the components located in the machine
compartment:
Orion Board
1.
Unplug refrigerator or disconnect power.
2.
Access the machine compartment components by removing
screws holding machine compartment cover on back of
refrigerator.
3.
Remove the two 1/4" screws holding the Orion Board to the
left rail.
4.
Disconnect the three wiring connectors and remove the
Orion Board.
EMI Filter
1.
Unplug refrigerator or disconnect power.
2.
Access the machine compartment components by removing
screws holding machine compartment cover on back of
refrigerator.
3.
Remove the 1/4" screw at the top of the EMI filter.
4.
Remove the EMI filter from the plastic clip.
5.
Disconnect the wiring connectors.
Condenser Fan
1.
Unplug refrigerator or disconnect power.
2.
Access the machine compartment components by removing
screws holding machine compartment cover on back of
refrigerator.
3.
Remove the single 1/4" screw at the bottom of the condenser
fan bracket.
4.
Disconnect the wiring connectors and slide out the fan to
remove.
Water Isolation Valve
1.
Unplug refrigerator or disconnect power.
2.
Access the machine compartment components by removing
screws holding machine compartment cover on back of
refrigerator.
3.
Shut off external water supply to refrigerator
4.
Remove the water supply connection to the water valve.
5.
Disconnect wiring connectors.
6.
Disconnect the water valve outlet water tube.
7.
Remove the two 1/4" screws securing the water valve to the
right machine compartment rail.
GF2 Board
1.
Unplug refrigerator or disconnect power.
2.
Access the machine compartment components by removing
screws holding machine compartment cover on back of
refrigerator.
3.
Remove the four 1/4" screws holding the metal cover in
place.
4.
Use a screw driver to release the clip holding the plastic cover
in place.
5.
Disconnect all eleven wiring connectors on the GF2 board.
6.
Release the plastic clips and remove the GF2 board.
WARNING
Electrical Shock Hazard
Disconnect power before servicing.
Failure to do so can result in death or
electrical shock.
Replace all parts and panels before operating.
A
B
C
D
A. Orion Board
B. Compressor
C. Condenser Fan
D. Water Isolation Valve
