Whirlpool Polara GR556LRK, Service Manual

Page: 28 / 88

4-4
4. To remove an indicator light:
a) Push on the body and slide the clip off
the shoulder of the lens.
b) Disconnect the two indicator wires from
the infinite switch terminals, or the wire
harness connectors.
Lens
Push
Indicator Light
REMOVING THE ELECTRONIC OVEN CONTROL
AND AN INDICATOR LIGHT
NOTE: Sharp edges may be present.
1. Unplug the refrigerated range or discon-
nect the power.
2. Remove the control panel from its
subchassis, (see page 4-2 for the proce-
dure), and position it as shown below.
3. To remove the electronic oven control:
a) Disconnect the wire connectors at P3,
P4, P7, and P8.
b) Remove the mounting screw.
Electronic Oven Control
c) Slide the electronic oven control board
to the right to unhook it, lift the board,
and turn it over.
d) Grasp the ribbon cable collar by the
locking arms, squeeze in, and discon-
nect the ribbon cable from the connec-
tor.
Screw
P4
P3
P8
P7
Ribbon Cable
Ribbon Cable Collar
(2) Indicator Lights (3) Indicator Lights
Electrical Shock Hazard
Disconnect power before servicing.
Replace all parts and panels before
operating.
Failure to do so can result in death or
electrical shock.
WARNING