Whirlpool LEW0050PQ - Electric Dryer, Job Aid And Service Manual

Page: 31 / 48

4-3
START
POWER
TEMPERATURE
BR
OR GY
BK BK
BR
BU BU
Pushbutton Switch Wiring
6. To remove the dryer selector switch:
a) Pull the knob off the selector switch
shaft.
b) Remove the two screws from the
switch.
Switch Screws
c) Disconnect the wire connectors from
the dryer selector switch terminals.
NOTE: The 6- and 10-pin connectors
have a locking tab. Raise the tab to
release these connectors.
WH - M2
BK - M1
GY - R2
RD - R1
GY - B
BU - NT
2GY - LT
BR - LT
6-PIN
10-PIN
TABS
7. To remove the indicator light:
a) Remove the dryer selector switch (see
step 6).
b) Push out on the locking sections of the
indicator light holder, and pull the indi-
cator light out of the holder.
c) Raise the locking tab and disconnect
the 6-pin connector with the two red
wires from the dryer selector switch.
Light Holder
Indicator Light
Out Out
6-PIN
Dryer Selector Switch
Dryer Selector Switch
Indicator Light Connector
Indicator Light
Assembly