3-4
• Never use more than 1 cup (250 mL) for
a full load. Use less for a smaller load
size.
• Follow the manufacturer’s directions for
safe use.
• To avoid spilling, use a cup with a pouring
spout. Do not let bleach splash, drip, or
run down into the washer basket.
• Use only liquid chlorine bleach in this
dispenser.
4.
Optional:
Pour measured liquid fabric soft-
ener into the liquid fabric softener dispenser.
Softener is added automatically during the
rinse portion of the cycle.
3.
Optional:
Pour measured liquid chlorine
bleach into the liquid chlorine bleach dis-
penser. Bleach will be dispensed automati-
cally during the wash part of the cycle.
Dilute liquid fabric softener by filling the
dispenser with warm water until liquid
reaches the bottom of the opening of the
dispenser.
• Do not spill or drip any fabric softener on
the clothes.
• Use only liquid fabric softener in this
dispenser.
5. Close the washer lid. Washer will not fill,
agitate or spin with the lid open.
6. Press the WATER LEVEL button to select
the correct setting for your wash load and
the type of fabric being washed. For a
medium load the indicator light is on, for a
large load the light is off.
• Choose a water level that allows the load
to move freely for best fabric care.
• You may change the water level setting
while the washer is filling. If you change
from high to medium but the water has
filled past medium, you will get medium
with the next fill.
7. Set the water temperature for the type of
fabric and soils being washed. Use the
warmest wash water safe for fabric. Follow
garment label instructions.
For Portable Installations
Wash and rinse water temperatures are set
at your faucet. The Wash/Rinse Tempera-
ture control does not set temperature.
Adjust the Hot and Cold water faucets to
desired wash temperature. Keep the Wash/
Rinse Temperature control set at COLD/
COLD.
NOTE:
The Cold/Cold setting allows water
from the faucet to enter the washer, but
does not control the incoming water tem-
perature.
• For a rinse temperature that is different
from the wash temperature, you must
adjust the water temperature at the fau-
cet after the washer has completed its
initial fill.
• To test the water temperature, press the
red water-flow button on the hose con-
nector.
