Whirlpool GW395LEG, Manual

Page: 46 / 68

4-24
1. Refer to “Removing The Oven Door Glass”
on page 4-22 and remove the door glass,
then proceed with the following steps.
Refer to Figure 4-20 for the following steps.
2. Position the oven door as shown in the
illustration.
3. Remove the two screws from the door
handle assembly and remove the assem-
bly.
4. Remove the two side covers.
5. Remove the two screws from the retaining
panel, then unhook the panel from the
outer oven glass and remove it.
6. Unhook the glass from the door tabs and
remove it.
7. Install the new outer oven glass in the
door.
8. Reassemble the oven door.
9. Reinstall the oven door on the range as
follows:
a) Grasp the door by the sides, and slide
the two door hinges into the tracks in
the range slots as far as the stop.
b) Pull the oven door open to the first
(broil) stop.
c) Lift the door straight up, and push in
until the hinges are over the stop and
are fully in place.
d) Close the oven door.
Door Handle Assembly
Handle
Screw
Handle
Screw
Side
Cover
Side
Cover
OUTER DOOR FRAME
OUTER OVEN GLASS
Slide Glass Into
These Two Tabs
RETAINING PANEL
Panel Screws
Guides Guides
Figure 4-20
REMOVING THE OUTER OVEN GLASS