17
To Use:
1. Touch “Time/Power” on the Main Menu.
2. Select a method from the chart.
3. Follow instructions on the display to program cooking time
and cooking power.
4. Touch “Start” on the touch screen, or START control.
The display will count down the cook time.
During the countdown, cook time and some cooking powers
may be changed by touching “Adjust Settings” on the touch
screen, and adjusting the remaining time and/or cooking
power.
When the cycle ends, the end-of-cycle tones will sound,
followed by reminder tones.
5. Touch CANCEL control or open the door to stop reminder
tones. The display will return to the Main Menu after CANCEL
control is touched.
Warm Hold
Hot cooked food can be kept warm in the microwave oven. The
Warm Hold function uses 10% cook power. Warm Hold can be
used by itself, or it can be programmed to follow a cooking cycle.
See “Cooking in Stages” section.
■
Cover plates of food.
■
Cover foods that were covered while being cooked.
■
Do not cover baked goods such as pastries, pies, turnovers,
etc.
To Use (for single cycle):
1. Place hot cooked food on the turntable, and close the
microwave oven door.
2. Touch WARM HOLD control.
3. Adjust warm time, if desired.
4. Touch “Start” on the touch screen, or START control.
The display will count down the warm time.
During the countdown, warm time may be changed by
touching “Adjust Settings” on the touch screen, and adjusting
the remaining time.
When the cycle ends, the end-of-cycle tones will sound,
followed by reminder tones.
5. Touch CANCEL control or open the door to stop reminder
tones and return to the Main Menu.
Cooking in Stages (or steps)
Manual cooking may be done in stages (or steps), up to 4 stages
total. The first stage may be programmed using any of the
manual controls. The stages may be reviewed at any time during
programming and/or cooking by touching “Review Steps” on the
touch screen.
NOTE: Manual Defrost can be programmed only as the 1st stage,
and is not available for subsequent stage programming.
To Cook in Stages:
1. Follow steps 1-3 in “Microwave Time/Power Cooking,”
or
follow steps 1-3 in “Time/Power Cooking.”
2. Touch “Add A Step” on the touch screen.
3. Select cook method, and follow screen prompts to program
the next stage.
4. Repeat steps 2 and 3 to program each additional stage.
5. Touch “Start” on the touch screen, or START control.
The display will show the cycling stage’s cook time and
cooking power, and will count down each stage in turn.
During the countdown, cook time and/or cooking power for
the cycling stage may be changed by touching “Adjust
Settings” on the touch screen, and following the prompts.
Each stage will immediately follow the previous stage, and
between cycle tones will sound when each new stage begins.
When the cycle ends, the end-of-cycle tones will sound,
followed by reminder tones.
6. Touch CANCEL control or open the door to stop reminder
tones. The display will return to the Main Menu after CANCEL
control is touched.
Melt
Microwaves
only
Microwave-safe
30% only
Boil &
Simmer
Microwaves
only
Microwave-safe;
SUREMIST
®
Steamer vessel
Enter desired
time.
Sizzle Pan
Microwaves
only
Sizzle Pan
100% only
Soften
Microwaves
only
Microwave-safe
20% only
Steam
Cook
Microwaves
only
Microwave-safe;
SUREMIST
®
Steamer vessel
Enter desired
time.
Warm
Hold
Microwaves
only
Microwave-safe
10% only
METHOD
COOK
WITH
COOKWARE
POWER
SETTINGS
WARNING
Food Poisoning Hazard
Do not let food sit in oven more than one hour before
or after cooking.
Doing so can result in food poisoning or sickness.
