Whirlpool G0, Manual

Page: 65 / 79

©
Service Competence Center
Ind
u
ctio
n
G
0
Service
Code Type Repair suggestions:
shown on
display
Failure description of failure Points to check subsequently until the appliance starts to work properly
again.
Failure description / repair
Troubleshooting
C-81 (NTCs ) Board or
Heatsink
over-temperature
Type 2 Check the cooktop installation
Check if customer is using wrong diameter size pan/pot
C-82 Coil Over Temperature Type 1 1) Check the cooktop installation
Check if customer is using wrong diameter size pan/pot
C-83 Coil NTC Stuck Type 1 1) Check the cooktop installation
2) Replace interested Coil
3) Replace power unit
C-84 Main line shape error Type 2 1) Check the frequency of the phase connected to the IPC. If the frequency is not
(50
± 2 ) Hz then the cause of the failure is not due to the appliance.
2) If frequency is OK, then replace the power unit board
C-85 Bad Curve Type 2 Change Pan or brand
Note:
For failure numbers that are bigger than 80; the letter that is shown is a “C” instead of “F”.