46
If machine is not level, use a 9/16" (14 mm) open-end or
adjustable wrench to turn jam nuts clockwise on feet until they
are about 1/2" (13 mm) from the machine cabinet. Then turn the
leveling foot clockwise to lower the machine or counterclockwise to
raise the machine. Do not exceed 2" (50 mm) from bottom of foot
to bottom of cabinet. Recheck levelness of machine and that all
four feet are firmly in contact with the floor. Repeat as needed.
HELPFUL TIP:
You may want to prop up front of machine about
4" (102 mm) with a wood block or similar object that will support
weight of machine.
Tighten leveling feet
When machine is level and all four feet are firmly in contact with
the floor, use a 9/16" (14 mm) open-end or adjustable wrench
to turn jam nuts counterclockwise on leveling feet tightly against
machine cabinet.
HELPFUL TIP:
You may want to prop machine with wooden
block.
Jam nut
Electrical Shock Hazard
Plug into a grounded 3 prong outlet.
Do not remove ground prong.
Do not use an adapter.
Do not use an extension cord.
Failure to follow these instructions can result in death,
fire, or electrical shock.
WARNING
Plug into a grounded 3 prong outlet
Complete Installation Checklist
n
Check electrical requirements. Be sure you have correct
electrical supply and recommended grounding method.
n
Check that all parts are now installed. If there is an extra
part, go back through steps to see what was skipped.
n
Check that you have all of your tools. Check that transport
materials were completely removed from back of machine.
n
Check that both hot and cold hoses are attached and water
faucets are on.
n
Check for leaks around faucets, valves, and inlet hoses.
n
Remove protective film from console and any tape remaining
on machine.
n
Check that machine is plugged into a grounded 3 prong
outlet.
n
Dispose of/recycle all packaging materials.
n
To test and clean your machine, press POWER and choose
the Quick cycle and run it without clothes. Use only HE
detergent. Use 1/2 the manufacturer’s recommended
amount for a medium-size load.
