4-16
WARNING
Electrical Shock Hazard
Disconnect from electrical supply before ser-
vicing unit.
Failure to do so could result in death or
electrical shock.
CAUTION:
When you work on the range, be
careful when handling the sheet metal parts.
Sharp edges may be present, and you can cut
yourself if you are not careful.
Refer to Figure 4-15 for the following steps.
4.
Remove the storage drawer from the range
and set it aside.
5.
From inside the storage drawer area, re-
move the screw from the front of the hous-
ing.
6.
From outside the range, remove the re-
maining screw from the front of the hous-
ing, and lower the housing so you can
access the cooling fan mounting screws.
7.
Unplug the wires from the terminals of the
cooling fan.
8.
Remove the three flat-head screws from
the cooling fan and remove the fan from
the housing.
REMOVING THE COOLING FAN
1.
Turn off the electrical power to the range.
2.
Pull the range out from the cabinet far
enough to access the back panel.
3.
Remove the left side panel from the range
(see step 3 on page 4-14 for the proce-
dure).
Summary of Contents for 4322525
