4-6
WARNING
Electrical Shock Hazard
Disconnect from electrical supply before ser-
vicing unit.
Failure to do so could result in death or
electrical shock.
CAUTION:
When you work on the range, be
careful when handling the sheet metal parts.
Sharp edges may be present, and you can cut
yourself if you are not careful.
1.
Turn off the electrical power to the range.
2.
Remove the control panel and rotate it
back on top of the maintop so it is out of the
way (see page 4-2 for the removal proce-
dure). NOTE: You do not have to remove
the electronic oven control from the panel.
3.
To remove a bimetal switch, remove the
mounting screw and disconnect the wires
from the terminals (see Figure 4-5).
Ambient
Bimetal Switch
Cooling Fan
Bimetal Switch
Control Panel
Chassis
Screw
Screw
Figure 4-5
REMOVING A BIMETAL SWITCH
Summary of Contents for 4322525
