Field
Value/Range
Meaning/Notes
Pack Voltage
0 to 130V
Normal range is 80 to 130V
DC Current
-500 to 1000
Amps
DC Amps
SOC (State of charge) 0 to 100%
State of Battery Pack Charge, normal is 20 to 100
High Cell Volts
2.00 to 4.55 volts
Highest volt reading of 36 batteries; normal is 2.50
to 3.90V
High Cell
1 to 36
Which battery cell has high volts
Low Cell Volts
2.00 to 4.55 volts
Lowest volt reading of 36 batteries; normal is 2.50
to 3.90V
Low Cell
1 to 36
Which battery cell has low volts
Highest Cells Temp
-50 to 150
°
F
Highest battery cell temperature; normal is 1 to 120
Highest Temp Cell ID
1 to 36
Which battery cell has highest temp
93
92
8. DIAGNOSTICS/TROUBLESHOOTING
NOTE: Should the hazard flashers start to automatically flash after turning the vehicle ON,
remove the key from the switch, press the lock button on the key, then press the unlock
button, put the key back into the switch and turn the vehicle back ON to restore normal
operation of the vehicle.
To access the Diagnostic Screens, place car in Park and turn the car off. Turn the key
to
“
On
”
while
pressing the stem on the dashboard for several seconds. Once the Diagnostic
Screens are displayed, you can cycle through the screens by pressing the stem. To get out
of the Diagnostics, turn the key to Off.
Diagnostic Screens
Battery Diagnostics 1
Summary of Contents for LiFe 2011
Page 1: ...owner s manual ...
