49
48
1. ADJUSTABLE BUCKET SEATS
The driver and passenger seats have a metal bar located under
the front edge of the seat to allow the seats to be moved toward
the front or rear of the vehicle as needed by the passengers.
They have a lever on the outside rear of the seat base to adjust
the angle of the seat back.
The 2 knobs on the front outside edge of the seat base adjust
the angle of the seat base. The front knob controls the angle of
the front of the seat base and the rear knob controls the same
adjustment on the rear of the seat base.
2. HEAD RESTS
Your vehicle is equipped with driver and passenger head rests
which are designed to help protect the seat occupant in the
event of a crash. All occupants, including the driver, should
not operate the vehicle or sit in a vehicle’s seat until the head
restraints are placed in their proper positions.
The head rest should be adjusted to fit the occupant of the seat:
the center “hole” in the head rest cushion should line up with
the back of the occupant’s head for the maximum cushion and
protection during a crash.
The head rest is composed of the upper cushion and two
adjustable placement bars. To raise the upper cushion, put your
fingers under it and pull it up to the desired height.
To remove the cushion completely, press the lever down and
lift the cushion all the way off. Always replace the head cushion
before operating the car: line up the placement bars into the
holes at the top of the seats, depress the lever at the base, and
lower the cushion into position so it “clicks” and locks into place.
All head rests must be reinstalled to properly protect vehicle
occupants.
Summary of Contents for LiFe 2011
Page 1: ...owner s manual ...
