TS-4 / Sep 2013
page 3 - 4
S E T U P G U I O P E R A T I O N
then be prompted to select an RBN file from your PC hard drive. Some de
‑
tails of the selected file will be shown before you begin the download of the
new software. You may cancel the upgrade at this point. Once you press
Yes
a progress bar will be displayed while the file downloads. While the file is
downloading you may still cancel the operation. Once the file is downloaded
the update of the device’s flash memory will begin, and again the progress bar
shows during the flash update. You may not cancel this operation and
YOU
MUST NOT REMOVE POWER
from your device until the flash update
cycle is complete. On the TS‑4 there will be three cycles of flash updates. The
first pass will be to download the software, the second pass will be to flash the
software, and the third pass will be for the field programmable gate array chip
if that has changed. When all of the flash programming cycles are complete the
GUI will tell you it is done. At that point you must power cycle your program
‑
mable panel device.
• Reboot... –
if the Reboot...
menu item is present, it can be used to force the de
‑
vice to reboot. When the menu item is selected, a confirmation dialog is shown
to give the user a chance to cancel the reboot. This option should be rarely used.
Help Menu
• Contents –
this menu item opens the help table of contents,
<Ctrl+F1>
.
• Search... –
this menu item opens the help search window.
• Index... –
this menu item opens the help index window.
• About... –
this menu item opens the WheatNet‑IP Talent Station‑4 Setup GUI
About box.
