manualshive.com logo in svg

Wheatstone Corporation D-9, Technical Manual, Page: 7 / 124

Share
Download
Wheatstone Corporation D-9 Technical Manual Download Page 7

page  Contents – 3

D-9 / Oct 2003

C O N T E N T S

Chapter 4 - Master Panel (MFS-D9)

Controls and Functions ................................................................ 4-2

Master Program Outputs .......................................................................................... 4-2

     Mix Destination 5.1 Surround .............................................................................. 4-2

     Master Mix Destinations ...................................................................................... 4-3

     Channel Master ON/OFF ..................................................................................... 4-3

     Dyn ....................................................................................................................... 4-3

     EQ ........................................................................................................................ 4-3

     DCM Master Displays .......................................................................................... 4-4

     PFL (Cue) ............................................................................................................ 4-4

     AFL (Solo) ............................................................................................................ 4-4

     Master Faders ...................................................................................................... 4-4

Submixes (Groups) Outputs ..................................................................................... 4-5

     TB ........................................................................................................................ 4-5

     Output Destinations, Group 1 Example ............................................................... 4-5

     Groups Output Display ........................................................................................ 4-5

     DCM Group Displays ........................................................................................... 4-5

     ON (G1-G8) Switch ............................................................................................. 4-6

     PFL (Cue) ............................................................................................................ 4-6

     AFL (Solo) ............................................................................................................ 4-6

     Submix (Group) Faders ....................................................................................... 4-6

Page Buttons ............................................................................................................ 4-6

Chapter 5 - Dynamics Processing Control Panel (DCM-D9)

Controls and Functions ................................................................ 5-2

Compressor/Limiter .................................................................................................. 5-2

     Dyn In ................................................................................................................... 5-3

     Threshold ............................................................................................................. 5-3

     Attack ................................................................................................................... 5-3

     Ratio ..................................................................................................................... 5-4

     Release ................................................................................................................ 5-4

     Makeup Gain ....................................................................................................... 5-4

MXM Confidence Feed ............................................................................................. 5-4

Talkback Preselects .................................................................................................. 5-5

Display Buttons ......................................................................................................... 5-6

Programmable Buttons ............................................................................................. 5-6

Mute Groups ............................................................................................................. 5-7

Fader ......................................................................................................................... 5-7

Chapter 6 - Host CPU (HC-9)

Overview ........................................................................................6-2

HC-9 BIOS Settings/Format .......................................................... 6-2

Ethernet IP Addressing ................................................................ 6-2

Ethernet Interface Wiring ............................................................. 6-2

Mixer Link Wiring .......................................................................... 6-3

Internal Programming Options .................................................... 6-3

D-9 / Jan 2006

Summary of Contents for D-9





























































































































Reviews:

No comments