Wheatstone Corporation D-9, Technical Manual, Page: 47 / 124

M A S T E R P A N E L
page 4 – 6
D-9 / Oct 2003
ON (G1-G8) Switch
The ON switch turns the group channel signal ON, pressing it again
turns the group channel signal OFF. The switch LED lights when the
group is ON.
PFL(Cue)
This switch lets the control surface operator monitor the group’s
pre-fader signal.
AFL(Solo)
This switch lets the control surface operator monitor the group’s
post-fader signal.
Submix (Group) Faders
These linear controls set the output levels of the submix channels.
When the control surface has recalled a preset or is under external serial
control from an automation system, the fader NULL LEDs light to
show that the master output level is actually different from what the
fader indicates. The master output level will remain at the computer
directed value until the fader is moved to a matching level, after which
the fader will control the level. The lit NULL LED indicates which
direction to move the fader to regain level control. Once the fader has
been moved to the matching level the LED will turn off.
Page Buttons
The three page buttons located on the top of the MFS panel and used
to simultaneously toggle groups of individual input channel PAGE
buttons at once. The PAGE A button places all input channels in Page
A mode, the PAGE B button places all input channels in B Mode, and
the FLIP ALL button toggles each individual input channel page button
to its opposite state (i.e., A becomes B, B becomes A). Useful for
instant LIVE to BREAK setups.