Wheatstone Corporation D-9, Technical Manual, Page: 33 / 124

C O N T R O L P A N E L
page 3 – 9
D-9 / Oct 2003
Note, the copy function does not copy source assigns, destinations,
presets, or input gain.
The UNDO button is used to undo a TAKE copy. Simply press UNDO
and then TAKE to return the modified channel to its pre-TAKE status.
There is only one level of UNDO. If you do a copy operation, then do
another copy operation, then press UNDO to go back to the status before
the last copy, pressing UNDO again will have no effect.
To Copy Groups
It is possible to take a bank of channels and duplicate it to
another channel bank of equal number. Press the COPY
button, then press the desired SET buttons on the source bank.
The COPY button and the source bank SET buttons will flash
in concert. Then press the PASTE button, which will begin
flashing; press the desired target channel SET buttons, which
will flash in concert with the PASTE button. To execute, press
the TAKE button.
This function can be used to copy the settings from any
number of channels to an equal size group of channels. The
channels in each group do not have to be consecutive, and channels within
a group can be a mixture from each PAGE if desired. There can even be
overlap; for example, you can choose to copy from channels 1, 2, and 3 to
channels 2, 4, and 5. After this copy, channels 1 and 3 would not have
changed, channel 2 would be set as channel 1 had been, channel 4 would
be set as channel 2 had been, and channel 5 would be set as channel 3 had
been.
When selecting channels for the COPY and PASTE sets, the order in
which you press the buttons matters. For example, if you selected, in order,
channels 1, 2, 4 and 3 for COPY, and then selected, in order, channels 5,
7, 6, and 8 for PASTE, the end result would be that channel 5 would have
channel 1 settings, channel 6 would have channel 4 settings, channel 7
would have channel 2 settings, and channel 8 would have channel 3
settings. Not that this is something you would necessarily want to do, but
that’s what would happen. To reiterate, order matters when selecting the
COPY and PASTE sets.
If the size of the COPY and PASTE groups are different, TAKE will
not effect the change, except for the special case of Copy One and Paste
Many, described next.
To Copy One and Paste Many
Press the COPY button, and then the desired source channel SET
button; both will flash in concert. Then press the PASTE button and the
target channel SET buttons, which will flash in concert with the PASTE
button. To execute, press the TAKE button.