Westric IW Series Installation, Operation And Maintenance Manual Download Page 53

Page: 53 / 82

76-5276-05

Page 53 of 82

TCP / IP Communication (Web Server) (Optional)

This variant allows to communicate the controller (s) of each WESTRIC IW Line unit with a PC through a 10 Mbps

Ethernet network, or directly to a PC.

The integrated Web server allows you to view standard HTML pages directly in a web browser.

This is a client application, therefore, depending on its level of authorization, control and monitor the state of the system

from a remote location.

HTML pages can be easily customized and downloaded by the end user.

Widely used programs can be used to create custom HTML pages (for example Macromedia® DreamWeaver ™ or

Microsoft® FrontPage ™) or to download them to the Web server (via FTP).

Loading the web page:

The website is already loaded from the factory.

Anyway, we detail below how to do it.

The web page is loaded to the embedded Web server in the PLC using an FTP program, we recommend using the

"FileZilla".

For this load, the following values are used:

IP: 192.168.0.250

User: "admin"

Password: "PASS" or "admin"

Port: 21

Summary of Contents for IW Series



















































































Search results

Summary of Contents for IW Series

Reviews:

Related manuals for IW Series

Brands by name

Popular brands

Westric IW Series, Installation, Operation And Maintenance Manual

Search results

Summary of Contents for IW Series

Reviews:

Related manuals for IW Series

Brands by name

Popular brands