43
Other System Configurations
Transceiver Cleaning System
Tranceiver
Cleaning System
This system
includes the
Bench-top system
base unit, the
cleaning/inspection
module, an FBP-P5
dual magnification
video inspection
probe and 6.4” TFT
LCD.
To save workspace,
the base unit can
be located
elsewhere, while
the module can be
placed in a
convenient
location for the
user.
This system is designed for both cleaning and inspection of optical transceivers. The
cleaning/inspection module utilizes our standard B1000 series system as the base unit.
The base units’ operation, is identical to the Bench-top system
described earlier in this manual.
Cleaning and
Inspection Module
Run-
Safety
Switch
Run-
Safety
Button
Safety
Disable
Switch
The transceiver cleaning module is attached to the
base unit via a 5’ hose.
Run-Safety switch
Two buttons operate the cleaning cycle
operation and safety function. Press one
button to open the safety switch and
then the other button to initiate the
cleaning cycle - either button will
perform each function.
The safety function can be disabled
by using the Safety Disable switch.
Move this switch from the default
position to disable the safety feature.
WARNING
The cleaning solvent is under pressure inside this
system. Westover Scientific highly recommends using
the safety switch feature to prevent accidental discharge
of solvent.
Base Unit
