3
Information
Important Information
Information provided by WSI is believed to be accurate and reliable. However, no responsibility is assumed
by WSI for its use.
WSI’s Commerce And Government Entities (CAGE) code under the North Atlantic Treaty Organization
(NATO) is 0L8C3.
The information contained in this publication is subject to change without notice.
Words that WSI considers trademarks have been identified as such. However, neither the presence nor
absence of such identification affects the legal status of any trademark.
Units of measurement in this document conform to SI standards and practices.
F.C.C. Information
Electronic test equipment is exempt from Part 15 compliance (FCC) in the United States.
Electronic test equipment is subject to the EMC Directive in the European Union. The
EN61326 standard prescribes both emission and immunity requirements for laboratory,
measurement, and control equipment.
Independent Laboratory Testing
This unit has undergone extensive testing according to the European Union Directive and Standards. All
pre-qualification tests were performed internally, at WSI, while all final tests were performed externally, at
an independent, accredited laboratory. This guarantees the unerring objectivity and authoritative
compliance of all test results.
This equipment has been tested and found to comply with the EN 61000-6-3:2001 specifications for
electronic and electronic apparatus intended for use in residential, commercial, and light industrial
environment. In addition, this equipment has been tested and found to comply with the EN 61000-6-
1:2001 specifications for immunity of residential, commercial and light industrial equipment. The
requirements of these rules and the measurement methods used for assessing equipment compliance to
these rules are available upon request from Westover Scientific.
Certification
