34
Westover Scientific
manufactures two types of
Video
Inspection Probes
which are
compatible with the
CleanBlast
system: the
Analog
and
Quick
Capture
Inspection Probes.
The
Analog Probe
has a four-pin
connector which requires a 4-6 pin
conversion cable in order to mate
with the 6-pin connector on the
portable CleanBlast unit.
Order Westover part number:
FBPP-DPAC2
Quick Capture Probe (6-pin) with conversion cable attached to the 4
pin Inspection Probe Input connector.
Video
Inspection
Probes
FBP-P1
Analog
, 4-pin Video
Inspection Probe, 200x
FBP-P5
Analog
, 4-pin Video
Inspection Probe,
Dual Magnification
200x & 400x
FBP-P105
Quick Capture
, 6-pin
Video Inspection
Probe, 200x
FBP-P505
Quick Capture
, 6-pin
Video Inspection
Probe,
Dual Magnification
200x & 400x
FBPP-DPAC2
Digital conversion
cable
-interfaces
6-pin connector on
Digital CleanBlast
systems to 4-pin
Analog Probe.
Portable System Operation
Using a Video Inspection Probe
The
Quick Capture Probe
is equipped with a 6-pin connector, which will plug directly into
the 6-pin probe input on the CleanBlast unit. Quick capture probes have a built-in video
capture switch. When used in conjunction to a digital configured CleanBlast unit, this
switch is used to capture the image that is displayed on the PC monitor.
