33
Step 3
Assure
that the CleanBlast
system is ON and the video
monitor is ON and set to the
correct input channel if necessary.
Portable System Operation
Attaching a Video Inspection Probe
Attach the Probe to the CleanBlast system
Step 1
Attach
a Video Inspection Probe to the Probe Input.
Step 2
A. Attach
a BNC cable from the CleanBlast “Video Out to a
video monitor.
B. Attach
the mini DIN connector from the LCD to the plug
on the CleanBlast unit (if applicable).
C. Attach
a
USB1.1 (A-B)
cable to the USB port of the
CleanBlast unit, and to a PC.
Inspection Probe Input
(6 pin connector)
A Westover
Scientific Video
Inspection Probe
can be used with
the CleanBlast
system.
The video signal
from the probe is
routed through the
system to the BNC
Video Out connector
on the top panel of
the system, and
also the mini DIN
connector for use
with the optional
6.4” LCD.
For USB/PC Applications:
The digitally configured CleanBlast Systems include multiple video
outputs.
You cannot utilize all three outputs simultaneously without
signal degradation.
To achieve a quality image when utilizing the USB
video output feature, one of the following conditions must apply:
1) The LCD display must also be connected to the 4-pin LCD jack;
OR
2) An external monitor must also be connected to the BNC
connector;
OR
3) Attach the supplied video termination plug onto the BNC
connector if neither of the two above apply.
IMPORTANT
