12
•
Allow the Grinder Motor to come to a COMPLETE STOP before engaging into
reverse “REV”.
•
Allow the Grinder Motor to come to a COMPLETE STOP before engaging in
forward “FWD” after using the reverse function.
•
NEVER operate the Grinder in reverse for more than 5 seconds at a time.
REVERSE FUNCTION
This Grinder is equipped with a Circuit Breaker as a safety precaution. If the Grinder
stops running, follow these steps to remedy:
1.
Turn the Grinder to the “OFF” ( ) position.
2.
Check the Grinder to see if there is a jam in the Grinder Head. If there is, the jam
needs to be cleared of the obstruction as outlined in “Grinding Tips.”
3.
Press the Circuit Breaker Reset Button.
4.
Turn the Grinder back on and resume grinding.
5.
If the Grinder still does not turn on, check that the electrical outlet is properly working.
Plug in another appliance to see if that appliance works from the outlet. Check
that the household circuit breaker has not been tripped. If none of the above steps
remedy the situation, or if the Circuit Breaker repeatedly shuts off the Grinder, contact
customer service for further assistance.
NOTICE:
DO NOT continue to use the Grinder if the Circuit Breaker trips repeatedly.
Continued use may cause permanent damage to the Grinder and will void the warranty.
CIRCUIT BREAKER INSTRUCTIONS
840303701 v15.indd 12
2/21/20 10:26 AM
