Westomatic H2O Hydration Station Azure Mk4, Technical Manual

Page: 64 / 125

Part Number: 350092 Issue: 3
Page 64 of 125
© Copyright Westomatic Vending Services Limited 2020
All rights reserved. No part of this publication may be reproduced, stored in a retrieval system, or transmitted, in any form or by
any means, electrical, mechanical, photocopying, recording or otherwise, without prior permission from Westomatic Vending
Services Limited.
13.2.10 ► Flush Settings
This will allow the user to set up the flush times for the water valves and syrup pumps. These
times are used for the “One button” flushing in Door Open Mode. See sections
8.2 & Error!
Reference source not found. for the location of the flush button
Flush Settings
└―――――► Still water ← Set Still water flush time
└―――――► Carb. water ← Set Carb. water flush time
└―――――► Syrups ← Set the time each syrup pump runs
└―――――► Water Pulse on ← Use to pulse water if required
└―――――► Water Pulse off ← Use to pulse water if required
‘Flush Settings’ are reached via ‘Service Mode’ thus:
►
SERVICE MODE <Enter 4-digit access code>
└ ► MACHINE SETTINGS
└ ►FLUSH SETTINGS
Use buttons
1 or 2 to scroll to the Flush Settings menu option. Press 3L to enter the sub menu.
This menu contains the following functions.
STILL WATER
CARB. WATER
SYRUPS
WATER PULSE ON
WATER PULSE OFF
Within this sub menu you can enter the maximum run time for flushing the water and syrup lines
for use with the one button flushing.
Water pulsing may be required under certain circumstances. Default settings for this is zero.
In order to flush out old syrup ready for a new one may involve pressing the flush syrup button
more than once.
13.2.11 ► Auto Clean
Auto Clean
└―――――► Active
└―――――► Monday
└―――――► Tuesday
└―――――► Wednesday
└―――――► Thursday
└―――――► Friday
└―――――► Saturday
└―――――► Sunday
└―――――► Start Time
‘Auto Clean’ is reached via ‘Service Mode’ thus:
►
SERVICE MODE <Enter 4-digit access code>
└ ► MACHINE SETTINGS
└ ►AUTO CLEAN