Safety Notes
9
repair it yourself. Contact your customer support.
▪
Keep bystanders a safe distance away from the work area.
Anyone entering the work area must wear personal protective
equipment. Fragments of workpiece or of a broken accessory
may fly away and cause injury beyond immediate area of opera-
tion.
▪
Transport and store the tools in a suitable container.
▪
WARNING! Do not modify or remove the protective equipment of
the machine. Do not fit other protective equipment instead.
▪
WARNING! Do not use sawblades.
▪
WARNING! The flange nut must be tightened before starting to
work with the machine.
▪
Check the grinding disc before use. The grinding disc must be
properly mounted and turn freely. Perform a test run for at least
30 seconds without load. Do not use damaged, out of round or
vibrating grinding disc.
▪
Immediately switch off the machine in case of considerable
vibrations or if other malfunctions occur. Check the machine in
order to find out the cause.
▪
Never reach into the danger area of the machine when it is
running. Chips must not be removed while the machine is run-
ning.
▪
The outside diameter and the thickness of your grinding disc
must be within the capacity rating of your machine.
▪
Do not use grinding discs that require liquid coolants. Using
water or other liquid coolants may result in electrocution or
shock.
▪
WARNING! Do not work with the machine in conditions with
flammable liquids, gases or dust. The machine produces sparks
able to ignite dust or fumes.
▪
WARNING! After switching off, the machine will not be idle
immediately. (After-running of the grinding disc.) Allow the grind-
