38
Assembly | Operation
▪
After charging, allow 15 minutes for the battery to cool before use.
▪
Ensure that the charger is disconnected from the mains supply after
use and is stored correctly.
▪
Do not leave batteries on charge for extended periods and never store
batteries on charge.
▪
The battery charger monitors battery temperature and voltage while
charging. Remove the battery once charging has been completed to
maximise charge cycles of the battery and not waste power.
▪
Batteries can become faulty over time, individual cells in the battery can
fail and the battery could short. The charger will not charge faulty
batteries. Use another battery, if possible, to check correct functionality
of the charger and purchase a replacement battery if a faulty battery is
indicated.
▪
Do not store Lithium-Ion battery packs in a discharged state long term.
This can damage the Lithium-Ion cells. For long-term storage, store
batteries in a high charge state disconnected from the power tool.
▪
The capacity of batteries will reduce over time. After 100 charge cycles,
the battery’s operation time and the maximum torque performance of
the tool will slightly reduce. This decline will continue until the battery
has minimal capacity after 500 charge cycles. This is normal and not a
fault with the battery pack.
Battery Disposal
1. Operate the device until the battery is completely discharged.
2. Remove the battery from the tool.
3. Wrap heavy insulating tape around the battery terminals or enclose in a
sealable plastic bag to prevent possible shorting.
4. Dispose of the battery through your local waste removal authority.
Before first Use
Unpack the saw chain sharpener and check all parts for any damage in
transit. Dispose of packaging materials or store it out of reach of children.
Plastic bags etc. may become a deadly toy for children.
