Operation
11
Before first Use
Open the packaging and carefully take out the appliance.
Remove the device from the packaging. Keep packaging material
out of reach of children. There is a risk of suffocation!
Check to see if all items are supplied.
Inspect the equipment and accessories for transport damage.
Intended Use
The mechanical sweeper is intended for sweeping level and dry
areas such as entrance drives, terraces, yards, etc.
The appliance may only be used for its intended use. Any other use
is deemed to be a case of misuse. The user/operator and not the
manufacturer will be liable for any damage or injuries of any kind
caused as a result of this.
Please note that our equipment has not been designed for use in
commercial, trade or industrial applications.
Our warranty will be voided if the equipment is used in commercial,
trade or industrial businesses or for equivalent purposes.
Assembly
(Fig. 1
– 5)
Note: You will find the feed-in brushes and the assembly material inside
the debris collector.
1. Mount the feed-in brushes (4) with 3 screws (12) each to the locating
plates at the bottom of the device.
2. Insert the push bar mounts (8) and (9) into the corresponding
receiving slots (fig. 4). Secure the push bar mounts (8) and (9) with
the screws (11).
3. Put the bottom section of the push bar (7) onto the
push bar mounts (8) and (9) and secure with the two
adjustment nuts (3) and the washers.
4. Slide the top section of the push bar (1) onto the
bottom section of the push bar (7) and secure with
two adjustment nuts (2), two assembly screws (10)
and the washers (13).
Washer
