![background image](http://html1.mh-extra.com/html/westfalia/10-85-89/10-85-89_original-instructions-manual_962913008.webp)
4
Safety Notes
Only plug the charger to 100 - 240 V~ mains power. Recharge the
battery only with the provided charger.
Never direct the impact wrench towards people, animals or plants.
The impact wrench creates a high noise emission level.
Therefore it is recommended to use appropriate hearing
protection when using it. All persons in the immediate work-
ing area have to wear eye and ear protection.
Wear convenient work clothes. Wear tight clothes, non-slip footwear
and a hair net if you wear long hair or tie it up. Jewellery and loose
clothing may be caught by the moving parts of the impact wrench.
The impact wrench has a hand arm vibration of 12.1 m/s2. To avoid
injuries due to the hand arm vibration, take sufficient rest breaks.
Protect battery and charger from humidity. Do not operate the
charger outdoors.
When not in use and before cleaning and servicing, disconnect the
charger from the power supply.
Take special care of the battery. Avoid dropping it onto any hard
surface and do not subject it to pressure or any other form of me-
chanical stress. Keep the battery away from extreme heat and cold.
Only use impact-quality sockets and accessories with the impact
wrench.
Keep your work area clean. Disorder can cause accidents. Take
care of adequate lighting.
Do not open or attempt to repair the battery or the charger. If any
parts are damaged have them repaired by a qualified technician or
contact our customer service.
Only charge, operate and store the battery at an ambient tempera-
ture between 10º C and 40º C.
Please note the included General Safety Notes and the
following safety notes to avoid malfunctions, damage or
physical injury: