Lit. No. 49513, Rev. 04
89
June 15, 2022
MAINTENANCE
Air Removal – HTS™ & Straight Blades
11. Turn the control ON and completely angle
blade to the left and right several times. Turn
the control OFF.
12. Fill the reservoir to the top of the fill hole and
replace the fill plug.
NOTE: Loosen the fill plug slowly to relieve
any pressure in the reservoir.
13. Turn the control ON and raise and lower the
snowplow several times. Activate the control
FLOAT function and manually collapse the
lift ram all the way after each lowering of the
blade. Turn the control OFF.
14.
Straight Blades:
Fill the reservoir to the top
of the fill hole and replace the fill plug.
HTS Blades:
Fill to within 2½" (6 cm) from the
top of the fill hole and replace the plug.
WARNING
To prevent accidental movement of
the blade, always turn the control OFF
whenever the snowplow is not in use. The
power indicator light will turn OFF.
Summary of Contents for UltraMount
Page 3: ......
