Lit. No. 49513, Rev. 04
39
June 15, 2022
OPERATING YOUR SNOWPLOW
MVP PLUS™ & WIDE-OUT™
JOYSTICK CONTROL
1. Turn the vehicle ignition switch to the "ON" or
"ACCESSORY" position. The control backlight
will illuminate.
2. Move the ON/OFF switch on the side of
the control to the "ON" position. The power
indicator light glows red, indicating that
the control is ON. The indicator light glows
red whenever the control and the vehicle
ignition switch are both ON and the electrical
connections to the snowplow are completed.
The ON/OFF switch operates as an
emergency stop if required.
WARNING
To prevent accidental movement of the
blade, always move the ON/OFF switch to
OFF whenever the snowplow is not in use.
The power indicator light will turn OFF.
NOTE: If a control function times out before
the desired blade movement is complete,
release the lever to the center position, then
move it back into the desired function.
3
4
2
1
L
R
RAISE
LOWER
ON/OFF
FLOAT
SCOOP
RETRACT
WING
WING
Power Indicator
Light (red)
ON/OFF Switch
(emergency stop)
FLOAT Light
(green)
Summary of Contents for UltraMount
Page 3: ......
