15
6620-3201
The parameters and values are:
Parameter
Values
Equivalent Web Parameter
cli number
CLI
dial_retries number -
dsync
off, on
Direct sync mode
fi
xed_rate
off, on
V110
fi
xed rate
ip_addr number
IP
address
ip_port number
IP
port
leased_line off,
on
-
lip_port
number
Listening IP port
msn
number MSN
msnv110
number
MSN for V.110
multi 0,1,2
Mode: 0=unacknowledged,
1=multi-frame, 2=multi-frame/
fallback
sockmode 0,
1
Socket mode: 0=Off 1=TCP
sub number
Sub-address
user_rate 5,6,7,8,9,10,11
V110 User Rate: 5=38400,
6=19200, 7=9600, 8=4800,
9=2400, 10=1200, 11=600
vmode 0,1,2,3,4
V Mode: 0=V120 mode, 1=V110
mode, 2=V110/V120 detect,
3=X75 Transparent, 4=X75 T.70
NL
Dial Retries
If an ISDN connection is established, but rate adaption is not negotiated, this parameter will allow the
unit to drop the connection and redial it.
Leased Line
This parameter will allow the unit to automatically attempt to maintain the connection once it has
been established. A connection can be disconnected by the unit if it is instructed to do so, but if the
connection is lost due to an error, it will continually redial. In other words, if the unit is not responsible
for a disconnection, redialling will take place.
To change the values of the LAPB parameters for rate adaptation, use the
lapb
command. Note that
LAPB 2 is used for “adapt 0” and LAPB 3 is used for “adapt 1”.
