11
6620-3201
4 Confi guring your unit
This section describes the various con
fi
guration parameters for the unit and how to set or change
them using the built-in web pages or the text commands. Con
fi
guration using the Web pages
is achieved by entering the required values into text boxes or tables on the page, or by turning
features on or off using checkboxes. The same results can be achieved entering the appropriate text
commands via one of the serial ports.
4.1 Logging In
To con
fi
gure the unit via the Web interface, either establish a DUN connection to it and then open your
web browser and enter 1.2.3.4 for the web address, or enter the unit’s Ethernet IP address
(192.168.0.99) into your web browser after con
fi
guring your PC to have an address on the same
subnet. You will be presented with a login page.
The default Username and Password are “username” and “password” respectively. Enter these and
click the
Login
button to access the con
fi
guration pages. The password will be displayed as a series
of dots for security purposes. Correct entry of the username and password will display the main
operations page.
Clicking on the
Click to load Applet graphics!
button will display a representation of the front panel
of your unit that will be updated every few seconds to show the actual status of the LED indicators.
The model number of your unit will be shown at the top of the screen. The unit’s serial number and ID
are shown below the front panel representation.
Down the left side of the page you will see a directory tree listing the various folders and pages that
are available.
Each folder may be preceded by a small “+” symbol and a closed folder icon indicating that it can
be expanded to reveal sub-pages or folders. To do this, click anywhere on the appropriate line. The
closed folder icon will change to an open folder icon and the “+” symbol will change to “-”. Clicking
on the line again will hide the sub-options. Where there are no sub-pages, a web-page icon is shown
next to the page title. Clicking on this will display the associated web page. The following sections
describe how to use these pages to con
fi
gure and monitor the operation of your unit.
