Draft 1 - 07/11/06
030-300417 Rev. A
33
July 2006
Media Gateway (Model WMT)
User Guide
13. CONFIGURATION
13.1 Single Static IP – Single IP Address PassThrough
The following settings will be displayed if you select
Single Static IP
from the
Configuration
menu. The Single
Static IP Configuration screen allows you to select the device on your LAN that will share your Single Static IP.
Before you begin this section, configure your PC settings to obtain an IP address from Media Gateway
automatically. (Refer to your Windows Help screen for instructions.)
NOTE: Single Static IP (SSI) allows the user to share the WAN assigned IP address with one device on the LAN.
By doing this, the device with the SSI becomes visible on the Internet. Network Address Translation (NAT) and
Firewall rules do not apply to the device configured for SSI. If you are using Bridge (Routed Bridge) protocol,
Single Static IP
configuration will not be available.
STOP:
Static NAT must be disabled before you can enable
Single Static IP
. To disable Static NAT, select
Services
from the
Configuration
menu. Next, click on the
static NAT
button. Select the device from the
Static NAT Device
drop-down menu and click on
disable
. Return to Single Static IP Configuration by selecting
Single Static IP
Configuration
from the
Configuration
menu.
