Draft 1 - 07/11/06
030-300417 Rev. A
48
July 2006
Media Gateway (Model WMT)
User Guide
If you clicked on
OK
in the preceding pop-up screen, the
Host Device
screen will be displayed. The
Host Device
screen will allow you to select which device will host the NAT service you selected on your local area network. You
must either select the device from the
Host Device
drop-down arrow or type an IP address in the field labeled
IP
Address.
If you click on
Cancel,
the connection will be dynamically assigned. Click on
done.
After you have selected a NAT service and you have saved it to your NAT service profile, the following screen will
be displayed. It shows which NAT service is active for the selected profile.
