16
Installation and Electrical Connection
5. Installation and Electrical Connection
5.1 Installation
• Protect the product from contamination during installation.
• Observe all applicable electrical and mechanical regulations, standards, and safety rules.
• Protect the product against mechanical influences.
• Install the sensor by means of the mounting hole with M4 screws (included in the scope of delivery).
• Do not exceed the maximum tightening torque of 1 Nm.
• Make sure that the sensor is mounted in a mechanically secure fashion.
• Specified torque values must be complied with
ATTENTION!
Risk of property damage in case of improper installation!
The product may be damaged.
• Installation instructions must be complied with.
CAUTION!
Risk of personal injury or property damage during installation!
Personal injury and damage to the product may occur.
• A safe installation environment must be assured.
