Wenglor P2PY1 Series, Operating Instructions Manual

Page: 27 / 37

27 Long-Range Laser Distance Sensors
7.1.2 Input/Output Functions (I/O)
7.1.2.1 Pin Function
The pin function is used to define the function of pins I/O1, I/O2 (digital versions only) and I3, as these can be
used for different functions.
Pin Possible Settings Default
I/O1
Switching Output
Switching point SSC1 is assigned to the switching output.
Error Output
The error output switches if one of the assigned errors occurs; see table “Status
Messages” on page 32.
Warning Output
The warning output switches if one of the assigned warnings occurs; see table
“Status Messages” on page 32.
Laser-Off Input
See I3 for an explanation
Teach-In Input
See I3 for an explanation
Acceleration Sensor Reset Input
See I3 for an explanation
Deactivated
The pin is deactivated.
Digital versions:
switching
output
Analog
versions:
error output
I/O2
Switching Output
Switching point SSC2 is assigned to the switching output.
Antivalent Switching Output
The switching output switches antivalently to switching output O1.
Error Output
The error output switches if one of the assigned errors occurs; see table “Status
Messages” on page 32.
Warning Output
The warning output switches if one of the assigned warnings occurs; see table
“Status Messages” on page 32.
Laser-Off Input
See I3 for an explanation
Teach-In Input
See I3 for an explanation
Acceleration Sensor Reset Input
See I3 for an explanation
Deactivated
The pin is deactivated.
Digital versions:
switching
output
P2PY109:
Antivalent
switching
output
Analog
versions:
not available